top of page
SPEEDY RJ45 - CAT6 RJ45 Crimp Plug

These plugs are designed to simplify twisted pair terminations by allowing the wire pairs to be easily inserted through the plug and out of the front. This allows the installer to easily check the wiring order before crimping the connector. Twist is maintained more easily enabling a better performing crimp. Waste is minimised and the plugs are suitable for either stranded or solid wires.

Housing allows the cable further inside so that twist is maintained up to less than 3 mm from the contacts.

SPEEDY RJ45 - CAT6 RJ45 Crimp Plug

  • Perfect solution for rapid termination for Category 6 twisted pair terminations.
  • Each plug allows twisted pair wires to be inserted through the body and pulled out of the front to ensure the correct wiring order before crimping.
  • Contact blades are suitable for stranded or solid wire cores from 24-26 AWG (0.51 - 0.40 mm), with insulation up to 1.0 mm O.D. ​

  • Suitable for termination of solid or stranded UTP cables with sheath O.D. of 5.0 - 6.0 mm.

  • Faults and failures minimised & Less cable scrap and wastage.

  • Simple one piece design.

  • N.B. Must be used with suitable crimp tool (e.g., our code TRCSPDY).

bottom of page